Description
This Wing Kit is designed for the HEE WING F-01 Ultra Delta Wing RC Airplane. Its unobstructed convection cabin design ensures the electronic equipment inside the cabin stays cool during operation. The airplane adopts an asymmetric double convex airfoil design, which is suitable for both long-endurance flights and high-speed maneuvering. Equipped with a dedicated base for digital and analog versions, this plane is lightweight but also high strength. The dual-rail cabin design allows for easy adjustment of the center of gravity.
Features:
Independent detachable lens plug for both FPV and visual observation flights
Wings have embedded carbon fiber rods with different angles
Small wingspan with large space for electronics
Four magnets for better hatch fastening
New wingtip design supports vertical take-off mode
Supports horizontal and vertical battery mounting
Tailored lens ring for better protection
All-new propeller locking method
Tailored for DJI Digital Air unit
Specifications:
Airplane Dimension: Wingspan 690mm, Height: 88mm, Length: 415mm
Fuselage space: Battery compartment: 175mm175mm55mm
VTX fixed seat: compatible with digital VTX and analog VTX
KIT Weight: 150g (epp-30)/190g (epp-20)
ESC compartment: 70mm38mm20mm
Material: EPP/ABS/Carbon Fiber
Max Flight speed: ≥220+km/h
Max Endurance: >70 minutes
Take off weight: 350g~850g
Min Flight speed: <27km/h Thrust: ≥920g(6*4E prop) Propeller: 5x5E/6x4E Max Mileage: >45km
Battery: 2S~4S
Note: When speed is ≥100km/h, it’s recommended to install the lens cover to prevent excessive inflow air from blowing away from the hatch.
KIT Frame: No electronic parts inside
Included in the package:
1x Hee Wing Ultra Delta Wing EPP Body
1x VTX Fixed Seat
2x Rudder Angle
1x Hardware Kit
2x Tie Rod (+/-)
1x Velcro Tape
1x Lipo Strap
1x 6″ Prop
1x 5″ Prop
1x Decal
Recommendations (not included):
Recommended Power: 2205/2350kv
Recommended Battery: 3-4s
Recommended ESC: 35A
3S 6inch Biblades / 4S 5inch Biblades
3-4S 1550-2200MAH, 6S 1300-1550MAH

$55.99






Leave a Reply